`High power cooling professional`
Devoted to become the thermal management leader in the new energy field!

Advisory hotline: 4008-557-528

hot key words： Dongguan skived fin heat sink vendor Shenzhen skived fin heat sink vendor Dongguan PV inverter heat sink PV inverter heat sink vendor Jiangsu skived fin heat sink vendor Custom SVG heat pipe thermal module

Where you are：Home ? Product Center ? Applications industries ? IT telecommunication cooling solution

Product

Product techniques

Applications industries

Standard product

Cooling solutions for IT telecommunications

3C products are also called information home appliances, which typically mean computers, telecommunications, and consumer electronics. There are a wide variety of products with a huge demand. China has become the worldwide largest 3C consumption market for 3C products. With the enhancement of the financial condition and income of our citizens, there is a higher demand for the quality of electronic products. Companies launch products with better configuration, better performance, andbetter designs in order to satisfy consumers
There are a great number of factors which affect the quality of electronic products and cooling is a factor that could not be neglected. Especially after the development of the "Samsung battery-gate" event in 2016, electronics manufacturers pay more attention to the cooling performance and safety of their products. How to make sure the cooling of an electronic product meet the stringent design requirements? The best approach is to plan for thermal management at the beginning of the product design cycle so as to acquire the optimal cooling solution. Winshare Thermal is an outstanding cooling techniques supplier, who can provide the cooling solutions for IT telecommunication electronics products including mainboard cooling, CPU cooling, graphics card cooling, radio frequency module cooling,RU cooling, game console cooling,VR cooling, IPC cooling, server cooling, central variable frequency air conditioner cooling,TEC cooling, etc.

The target to be achieved by the simulation of the cooling solution:

PCB source temperature	≤100℃
CPU temperature	≤80℃

Schematic of simulation model and relevant parameters:

(1)

DCDC output	Thermal conductivity:10W/(m*K) Power:5W
CPU chipset	Thermal conductivity:10W/(m*k) Power:10W
PCB MST	Thermal conductivity:15W/(m*K) Power:5W
CPU PCB	Thermal conductivity:15W/(m*K) Power:4W
CPU heat sink	Dimensions: 125956mm, base plate thickness:2mm, fin count: 10pcs, thickness: 0.6mm；Thermal conductivity: AL-extru. 180W/(m*K)
CU block	Dimensions:41414.7, Thermal conductivity:385 W/(m*k)
Thermal grease	Thickness: 0.3mm，Thermal conductivity:3.5W/(m*K)
Soldering approach	Solder paste 4258，Thermal conductivity:48W/(m*k) 0.2mm

(2)

Front side of the grille	Dimensions:170*27mm; Open area ratio:0.5
Right side of the grille	Dimensions:35*30 mm; Open area ratio:0.6
Back side of the grille	Dimensions:30*30 mm; Open area ratio::0.7
fan	Dimensions:303010 mm

(3)

Top side of mainboard	Dimensions:140170mm; Thermal conductivity:10W/(mk); Power:3W
Back side of heat source	0.8W/pcs
Front side of heat source	Left row:0.8W/pcs; right row: 1.2W/pcs; The Row marked as "2":1.5W/pcs
Heat sink	Dimensions:1401704.5mm; Base plate thickness: 2mm; Fin height:2.5mm, Fin count:10pcs; fin thickness:0.6mm; Thermal conductivity:180W/(m*K)
Thermal grease	Thickness: 0.3mm; Thermal conductivity:3.5W/(m*K)

(4)

ottom side of mainboard	Dimensions:140170mm; Thermal conductivity:10W/(mk); Power:3W。
Source of inverse	功率：1.5W/pcs
Heat sink	Dimensions:1401704.5mm; Base plate thickness: 2mm; Fin height:2.5mm， Fin count:10pcs; Fin thickness:0.6mm; Thermal conductivity:180W/(m*K)
Thermal grease	Thickness: 0.3mm; Thermal conductivity:3.5W/(m*K)

Descriptions of the heat sink cooling solution:

(1) Add an30*10mm axial fan to increase the air flow through RX module;
(2) Modify the copper fins in front of the fan in order to increase system air flow.

Schematic of the simulation model of the overall cooling layout:

Parameters of the copper fins after the modification:

Copper fins	Dimensions:30120.3mm; Inclination: 1.0; Quantity: 30pcs
Copper fins	Material:C1100; Thermal conductivity:385W/(m*K)。
Heat pipe	D6 heat pipe thickness: 3mm with the pressed-tube technique; Heat pipe type: Powder sintered; Thermal conductivity:10000W/(m*k)
Add a 30*10mm axial fan; the open area ratio of the new fan inlet is 0.7.
Baffle	Dimensions:160330.5mm; Material: SUS

CPU fan operating point: Volume flow rate:2.43ft^3/min Pressure:17.47Pa

Schematic of simulated CPU module temperature and air flow distribution:

　Ambient temperature: 40℃; Maximum temperature of the CPU chipset:64.43℃

Schematic of the simulated temperature distribution on the top side of the RX module:

NO.	Maximum temperature	NO.	Maximum temperature	NO.	Maximum temperature
Source 1	59.43	Source 1.7	59.73	Source 3.1	59.59
Source 1.1	59.54	Source 2	60.02	Source 3.2	59.7
Source 1.2	59.66	Source 2.1	60.19	Source 3.3	59.77
Source 1.3	59.73	Source 2.2	60.16	Source 3.4	59.8
Source 1.4	59.76	Source 2.3	59.96	Source 3.5	59.8
Source 1.5	59.77	Source 2.4	59.76	Source 3.6	59.78
Source 1.6	59.76	Source 3	59.48	Source 3.7	59.74

Schematic of the simulated temperature distribution on the bottom side of the RX module:

NO.	Maximum	NO.	Maximum
Source 4	60.83	Source 4.4	60.95
Source 4.1	60.53	Source 4.5	60.89
Source 4.2	60.92	Source 4.6	60.8
Source 4.3	60.96	Source 4.7	60.67

Fan operating point:
CPU fan: 2.43ft^3/min ,17.47Pa；
RX fan1: 2.23ft^3/min ,18.65Pa；
RX fan2: 2.5ft^3/min ,17.09Pa；
RX fan3:2.22ft^3/min,18.70Pa。

Air flow through fan grilles:
CPU grille:2.26ft^3/min；
RX grille1:1.95 ft^3/min；
RX grille2:2.23 ft^3/min；
RX grille3:1.962ft^3/min；
Total: 8.4ft^3/min。

Miniature of the overall air flow trajectory from the simulation results:

Summary of the simulation results for the cooling solution:

	CPU maximum temperature （℃）	Temperature range of the heat source （℃）	System air flow (ft^3/min)
Simulation results of the solution	64.43	60.92~59.43	8.4
The results meet the requirements of CPUtemperature less than℃and heat source temperature less than 100℃ and the thermal design is complete.

Winshare New product

: The voice of Winshare Thermal: credit and word

Winshare Thermal Ltd. (hereinafter referred to as Winshare Thermal) was founded in 2009. We specialize in the research and development, production and technical services of high power cooling solutions. We are devoted to becoming the leader in the thermal... [See details]

News information

: Wenxuan heat for four consecutive years to become

March25,"LeanCollaborativeWin-WinFuture"SunshinePowerSupply2017Supplie ... [See details]

MORE+ News

MORE+ Industry

Dongguan website construction

RM新时代app下载-首页

High power cooling professional Devoted to become the thermal management leader in the new energy field!

Product techniques

Applications industries

Standard product

`High power cooling professional`
Devoted to become the thermal management leader in the new energy field!